D210P/DE210P on DAHDI User Manual
OpenVox Communication Co. LTD.
URL: www.openvox.cn
25
Appendix B
Hardware settings
Span 2
Span 1
Each DIP Switch controls one span
configuration for E1 or T1 mode.Setting
DIP1 to ON means span1 will be
E1.Setting DIP1 to OFF means span1
will be T1.
Mode Switch
DIP1:ON:Digium Compatible Model-use wct4xxp directly
OFF:OpenVox dedicate model-use openvox driver
DIP2: ON:Force PCI Burst On,this model will omit noburst
parameter in wct4xxp,always keep using PCI Burst model
OFF:PCI Burst controlled by driver.Burst controlled by
noburst parameter in wct4xxp(default is off)
If there is only one card in PCI slot,CardID switch
should be set to 0,And adding a card the switch
value should be add
“
1
”
. For example, there
are two cards, it is need to set the first card
’
s
switch value to 0 and the second set to 1
