CIA-675-001 Rev 1.1
6 |
P a g e
Direct: (602) 773-1700
Main: (800) 481-7459
2101 W Peoria Ave, Suite 100
Phoenix, AZ 85029
www.opentechalliance.com
2.
Mount the back plate to the desired Gateway location, (which must be inside a protected area)
using the 4 grommet filled holes in the back panel shown. There are also a series of knock outs
in the back and the floor of the enclosure for pulling the wires through.
3.
Mount the router and the battery and then pull the necessary wires through the knockouts on the
back of the housing. The router has a bracket to hold it in place, the battery rests free in the cabinet.
After the wire connections are complete, excess wire can be pushed back into the wall or it can be
carefully positioned inside the enclosure for future maintenance and service.
Figure 2 –
Gateway Physical Dimensions
Figure 3 –
Gateway Baseline
(Minimum) Wiring
