CIA-675-001 Rev 1.1
5 |
P a g e
Direct: (602) 773-1700
Main: (800) 481-7459
2101 W Peoria Ave, Suite 100
Phoenix, AZ 85029
www.opentechalliance.com
INSTALLATION
General:
The gateway is designed to manage access to or from a series of secured areas. It operates in
conjunction with a central database that contains a list of access codes and areas these codes are valid
for. The Gateway communicates with a master database that exists centrally accessible via the internet.
The central database is the source of the access code to access area and access time correlation as well as
all system configuration information. The Gateway will operate standalone using cached data if internet
connectivity is lost however no changes in access codes or configuration are possible until internet
connectivity to the master database is restored. The Gateway cabinet contains one Main PCB, an Ethernet
Router and a Battery and should be located indoors inside the protected area.
The Gateway can be used to control gate access, building access, door access, elevator access, lighting
and other security related functions that are relay driven however all the control logic must be configured in
the central database.
Physical Installation and Mounting
:
The following are instructions on installing and connecting the wiring
run from the system Gateway:
1.
Open the device by unlocking the door with a tool, typically a screwdriver. A security lock on the
front panel is optional.
Figure 1 –
Gateway Components
