OpenEye EasyDVR OE1-D12004, Руководство пользователя

Страница: 69 / 90

30757AC 69
LIVE DISPLAY
Live Display is the default mode of the recorder. After startup the recorder will load to the Live Display.
After being left idle on any menu, the recorder will return to the Live Display.
Channel Selection
To display an individual camera channel press the channel number buttons on the front panel, on the
remote control, or via the onscreen menu bar using the mouse.
Display Mode
To cycle through the available the available display options press the DISPLAY button on the front
panel or the remote control, or use the mouse to click Mode on the right-click menu or the onscreen
menu bar. The display mode options depend on the recorder model (4, 8, or 16 channel); the available
options are single channel, four cameras (2x2), nine cameras (3x3), and sixteen cameras (4x4).
Sequence
Once any Display Mode has been selected (except the 16 channel 4x4 view), press SEQ on the front
panel or the remote control, or use the mouse to click Sequence on the right-click menu or the onscreen
menu bar. The recorder will then begin sequencing through the camera cannels based upon the Display
Mode at the time the sequence is started.
Single Channel: The recorder will sequence through each camera channel individually. This
sequencing mode can be customized using the Main Monitor Schedule option in the DISPLAY
menu (see the section earlier in this manual).
4 Channel (2x2): The recorder will sequence through channels 1-4 in the first view, then channels
5-8, then 9-12, then 13-16. This sequence mode is only available on the 8 and 16 channels
models; and the 8 channel will only sequence through channels 1-4 and 5-8.
9 Channel (3x3): The recorder will sequence through channels 1-9 in the first view, then channels
8-16. This sequence mode is only available on 16 channel models.