OpenEye EasyDVR OE1-D12004, Руководство пользователя

Страница: 23 / 90

30757AC 23
Assign a unique Unit ID on the recorder
1. Press MENU .
•
If prompted, login with an administrator level username.
2. Select SYSTEM and press ENTER .
3. Select RS485 Setup and press ENTER .
4. Select Unit ID and press ENTER .
5. Use the UP / DOWN arrows to set the desired Unit ID.
6. Press ENTER when the desired number is displayed.
Note See the Unit ID and Remote Control Number table below for additional reference.
Set the number on the Remote Controller
Press and hold the ID button on the remote controller and enter the corresponding Remote Control
number to operate the recorder. For example, assuming the Unit ID is set to 225, press ID on the
remote controller and then press 2 immediately.
Unit ID and Remote Control Number
To use the included remote controller, each recorder needs a unique Unit ID number that corresponds
with a Remote Control number. Use the table below for reference.
Unit ID Remote Control ID
224 01
225 02
226 03
227 04
228 05
229 06
230 07
231 08
232 09
233 10
234 11
235 12
236 13
237 14
238 15
239 16