Open Country FG-250SK, Инструкция по эксплуатации и уходу

Страница: 6 / 20

4
E
ng
lis
h
How to clear Jammed Foods
If the motor slows or stops, press Switch “OFF” (O) immediately.
Press the Switch to the REVERSE position for several seconds to clear
jammed food in the Grinder Head.
Release the Reverse switch and try operating as usual.
If motor slows or stops again, press Switch “OFF” (O) and unplug from
electrical outlet. Follow cleaning instructions to clear the jammed food
completely. 1.
2.
3.
4.
CLEANING INSTRUCTIONS
Always unplug unit when not in use, before inserting or removing parts and
before cleaning.
NEVER immerse Base unit in water or other liquids. Wipe Base with damp
cloth and mild detergent. Do not use harsh or abrasive cleaners on Base as
it could damage the finish.
Wash all parts, except Base, in hot soapy water, rinse and set aside to
dry. Use care when handling Cutting Blade. NOTE: REMOVABLE PARTS
ARE NOT DISHWASHER SAFE. Dishwasher detergents may cause pitting
and corrosion. Always wash by hand in soapy water.
The Blade and Cutting Plates should be coated with cooking oil after
washing and drying. Wrap in grease-proof paper or plastic bag to prevent
corrosion (rust).
Store appliance in a dry place.
Any other servicing should be performed by an authorized service
personnel.
Grinding Tips
Fine Cutting Plate - Use for finely ground texture, such as spreads, baby food
or hamburger.
Course Cutting Plate - Use for coarsely ground texture, such as nuts,
vegetables or ground meat for chili.
Raw Meat and Fish - These items will have a minimum loss of juices if
thoroughly chilled before grinding. When grinding larger quantities, fats can
build up inside the Grinder Head. If this occurs, disassemble and wash parts
in soapy water, then reassemble. After grinding meat you can clean the Feed
Screw by grinding a slice of bread.
1.
2.
3.
4.
5.
6.