Open Air Cinema CINEBOX HOME SYSTEM, Руководство пользователя

Страница: 10 / 21

10
STEP 3: ATTACH POWER AND AUDIO XLR CABLES
Connect speaker power cord to each speaker. Plug in speaker
power cord to an extension cord or power source. Plug in 50’ (or
100’ for 20’ system) XLR audio cables in to the XLR input (middle
jack) on the back of each speaker. Run other end of XLR cables to
the CineBox Pro console, but do not connect yet.
ATTENTION: Make sure speakers are turned off and speaker volume
is all the way down (counterclockwise) before connecting speakers
to power or CineBox console. Do not power on speakers until XLR
cables have been connected to CineBox console. Failure to do so
could result in damage to speakers due to power surge.
Plug this end of 50’
or 100’ XLR cables
into XLR (middle)
input into the back
of each speaker
SPEAKER SETUP
Run this end of 50’ or 100’ XLR cable to the
CineBox Console from each speaker, but don’t
plug into the console yet
Speaker input will look
similar to this
(actual XLR cables and inputs not pictured, for illustration purposes only,
CineBox™ console will vary with system definition )