2
Operation instruction
GB
Please read the use instructions carefully before use. And please keep this instruction for future reference.
1. Safety instruction:
Electrical products can cause death or injury damage to property. If in any doubt about the installation or use of
this product, please consult a competent electrician.
1)
This unit is suitable for outdoor use only when used correctly.
2)
Before mounting and maintenance please make sure that the electrical supply has been switched off to avoid
electric shock.
3)
The light must be earthed.
4)
Replace the cracked protection glass immediately and use only original parts to substitute.
5)
Before maintenance work, the power should be switched off. The maintaining should be done only by a
qualified electrician.
6)
If the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the
manufacturer or his service agent or a similar qualified person in order to avoid a hazard.
CAUTION:
This unit can become extremely hot while under operation.
Do not touch the unit until it has had time to cool down.
Make sure this lamp is far enough away from any combustible materials and/or surfaces.
Make sure there is adequate ventilation to aid heat dissipation.
2. Assembly and use
1)
Slide the stand into this lamp bracket. Align the holes in the bracket and the stand. Insert and tighten angle
adjustment screw knob.
2)
To alter the angle of this lamp, simply loosen the angle adjustment screw knob, pivot this lamp until the
desired angle is achieved and re-tighten knob.
3)
Check this lamp is secure and that the stand is stable and has a firm footing. Ensure cable is not catching on
any sharp object and that the mains plug connection is adequately protected against rain or moisture.
4)
Your lamp is now ready for use.
CET389
Handle
CET387 CET386
Handle
Screw
Screw
Stand
3. Specification:
SAP code
CET389
CET387
CET386
Supply Voltage
100-240V 50/60Hz
100-240V 50/60Hz
100-240V 50/60Hz
Power Consumption
20W
30W
50W
Lumen Output
1600lm
2400lm
4000lm
Color Temperature
4000K
4000K
4000K
CRI
>70
>70
>70
Beam angle
110°
110°
110°
Power Factor
>0.9
>0.9
>0.9
Operating Temp Range
-
35°C
~+
50
°C
-
35°C
~+
50
°C
-
35°C
~+
50
°C
IP Rating
44
44
44
Safety Classification
Class I
Class I
Class I