Getting Started
Ooma Butterfleye is shipped with a permanently-installed battery. When you unbox the device, your first
step should be to use the included AC adapter and Micro-USB cable to plug your Ooma Butterfleye in.
Allow the camera to charge until it is at 100% battery capacity. If the battery is fully drained, charging
the camera takes about four to six hours.
Once the camera is fully charged, follow these steps to complete your setup:
1
Download the Butterfleye Security Camera app from the App Store (iOS) or from Google Play (Android)
and install it on your mobile device.
2
Open the app and either create an Ooma Butterfleye account or sign into an existing account.
Make sure your phone’s Wi-Fi and Bluetooth capabilities are turned on.
3
Hold down the power button on top of the camera to turn the Ooma Butterfleye on. The button
will blink green three times and then turn solid blue. The application will automatically detect
your camera.
4
In the Ooma Butterfleye app, go to “Add a Camera” and follow the on-screen prompts to pair
your camera and connect it to the internet.
Adding Ooma Butterfleye to an Existing Account
You can add up to six Ooma Butterfleye cameras to your Butterfleye account. Simply navigate to
the “Add a Camera” page inside the Ooma Butterfleye app and follow steps 3 and 4 above to add
additional cameras.
Ooma Butterfleye LED Blink Codes
Blue blink - Video is recording
Blue solid - Find & Identify button is being pressed in the app, or the camera is unpaired
Green 3x blink - Camera is turning on
Red 3x blink - Camera is turning off
Red continuous blink - Battery is at or below 20%
Red solid - There is an error
Amber continuous blink - Internet is unavailable
Amber 3x blink (when camera is on) - Camera is plugged into the charger
Purple continuous blink – Camera upgrade in progress
Setting up Ooma Butterfleye
– – – – –
————–
— — —
— — —
– – – – –
————–
– – – – –
— — —
– – – – –
– – – – –
————–
— — —
— — —
– – – – –
————–
– – – – –
— — —
– – – – –
4
