DX26/DX32 OPERATOR MANUAL
16
Rev 4 –11/4/2021
●
Suitable for deep cycle battery charging
WARNING:
Fire or explosion hazard. The battery releases hydrogen.
Please be away from spark or open fire. The battery cabin must be kept
open when charging.
FOR SAFETY:
Please wear protective gloves and eye protectors when treating the battery
and battery wiring when repairing the machine. Avoid contacting the battery acid. When
charging, please open the side of the wastewater tank to facilitate ventilation.
1.
Move the machine to the place with good ventilation for charging.
2.
Stop and place the machine on the level ground and turn the key to the close position.
3.
When charging, tilt back and leave open the waste water tank to facilitate ventilation.
4.
Plug the AC (alternating current) power cord of the charger to the power socket with
sound grounding.
5.
Plug the red DC (direct current) power cord of the charger to the battery charging
socket located on the steering column of the machine.
6.
The charger will automatically start charging and will automatically switch off when
charging is complete and the batteries are fully charged.
Hint:
The machine will not work when being connected to the charger.
Note:
during the charging of the charger, please do not pull the DC cord of the charger out
of the socket of the machine to avoid generation of arc strike. If the charging must be
suspended during the charging, please pull out the AC power cord first.
