DX26/DX32 OPERATOR MANUAL
11
Rev 4 –11/4/2021
Installation of Brush/Pad
For suggested brush and pad selection, please refer to the section of
[Information on Brush and Pad below] in this Guide or consult your local authorized dealer.
1.
Stop and place the machine on the level
ground, and take out the key.
2.
Lift skirt (should be loose)
3.
Rotate counterclockwise to loosen and
remove brushes or pad driver.
4.
To replace pads, remove blue retaining
clip by pinching finger points together.
(see image)
5.
Place correctly sized pad on driver and
secure with blue retaining clip. Pinch
finger points together and press firmly
until you hear a click.
6.
With pad/brush side down, lift up onto
driver and rotate clockwise until pad is
secure.
