Onwa KR-1338C, Руководство оператора

Страница: 30 / 87

2.16 Shifting (off centering) the Picture
Your vessel's position can be shifted up to 75% (not available on 48nm range)
of the range in use to view the situation around your vessel without changing
the range or size of targets.
Place cursor
Where desired
Press [OFF CENTER]
key to off center display
Cursor
Cursor
Figure 2-12 Shifting the picture
1. Press the omnipad to set cursor where desired.
2. Press the [F1(A/C SEA)] control if its function is set for SHIFT (default
setting), or select SHIFT on the menu. OFFCENTER appears at the top right
corner of the display when the picture is shifted.
Cancelling shifted picture
Press the [F1(A/C SEA)] control again.
2.17 Zoom
The zoom feature allows you to double the size of the area between your vessel
and any location within the current range to take a closer look at an area of interst.
1.Select location with the cursor.
2.Press and hold down the [F1 (A/C SEA)] control about two seconds if its
function is set for Zoom (default setting), or select ZOOM on the menu,
Zoom appears at the top right corner when the ZOOM function is on .
22