Onwa KR-1338C, Руководство оператора

Страница: 29 / 87

Measuring range and bearing between two targets
The procedure which follows shows how to measure the range and bearing
between target
's origin (cursor) on the center of target
's
origin shifts to cursor.
4. Press the [EBL/VRM CONTROL] key.
5. Press the onmipad to bisect target
"A" and target "B" in Figure 2-11.
1. Press the omnipad to place EBL1 "A".
2. Press the [EBL/VRM SELECT] key to choose EBL1 readout and then press the
[EBL/VRM CONTROL] key.
3. Select EBL OFFSET on the menu and press the [ACQ/ENTER] key. EBL1
"B" with EBL1. Check the EBL1 readout to
find the bearing between target "A" and target "B".
6. Press the [EBL/VRM SELECT] key to choose VRM1 readout. Press the omnipad
to place the outside edge of VRM1 on the inside edge of target "B". Check the
VRM1 readout to find the range between target "A" and target "B".
7. To cancel, select EBL OFFSET on the menu and press the [ACQ/ENTER] key.
6.0 NM
2.0
EBL1 origin
(Initial position
of target)
Target moved
Here.
VRM1
Offset EBL
(EBL1)
VRM1
range
EBL1
bearing
70.0 R
6.0 NM
EBL VRM1
Figure 2-10 Predicting collision course by
using the offset EBL
VRM1
EBL1
70.0 R
Bearing
VRM1
EBL1
VRM
4.5 NM
Range
Figure 2-11 Measuring the range and bearing
between two targets by using the offset EBL
21