22
PRIVACY MASK
：
PTZ SPEED
：
SET ZERO
POWER UP
MENU PASSWORD
MENU IDLE
PTZ AUTO STOP
SAVE
BACK EXIT
2.4.4.8
Next Page
Move the cursor to the NEXT PAGE and then click the confirm button, you can go to the third menu to
set the PTZ SPEED, SET ZERO, POWER UP and etc.
z
PRIVACY MASK: Here you can set the privacy mask number and etc. It includes the third menu. Please
move the cursor to the current item and then click the confirm button to go to the next interface.
z
PTZ SPEED: It is to set PTZ speed. Please use the left/right button to set.
z
SET ZERO: It is to set the PTZ initial position. Please move the PTZ to the corresponding position and
then click the confirm button to complete the setup.
z
POWER UP: It is to set the PTZ action when the speed dome boots up. Click the confirm button to go to
the next interface. To set
z
MENU PASSWORD: It is to set the password to go to the PTZ menu. Click the confirm button to go to
the next interface. To set
z
MENU IDLE: If current setup is ON, once you open the menu and leave it idle for specified period, the
menu may automatically disappear. If current setup is OFF, the menu is always there and will not
disappear. Please use the left/right button to set.
z
PTZ AUTO STOP: The speed dome will stop all the PTZ operations when there is no command for the
specified time. It includes various setups. Please use the left/right button to set.
z
BACK: Go back to the previous menu.
z
EXIT: Log out the system menu.
Privacy Mask
Move the cursor to PRIVACY MASK and click confirm button, system goes to privacy mask setup
interface.
Note:
z
For security reasons, please set privacy zone a little bit larger than the privacy object size.
z
Each time, after modifications you need to move the cursor to SAVE button and then click confirm
button to get all setup activated. Otherwise, privacy zone may not move correspondingly with the object.
Please enter privacy mask menu. Move the cursor to PRIVACY NO, please use left/right key to set different
privacy zones. For example, shift to 001 section and then move the cursor to PRIVACY MASKING.
Secondly, click OK button to go to the setup interface. Now there is a privacy zone in the screen centre.
Operate PTZ to move the camera screen so that the centre of the object you want to shield is overlaying
with the centre of the screen.
Thirdly, move the cursor to RESIZE and then click left and right key to adjust privacy zone direction and size.
Move the cursor to SAVE and then click confirm button to exit. Please note you need to click SAVE button to
PRIVACY NO
：
1
PRIVACY MASKING
：
OFF
SETTING
BACK EXIT
RESIZE
：
↑
SAVE
BACK EXIT