20
IDLE FUNC
：
OFF
IDLE TIME
：
010MIN
IDLE ACTION
：
PRESET
PARAMETER
：
NONE
BACK EXIT
TASK NO
：
1
TIME TASK
：
OFF
TASK SETTING
TASK INFORMATION
DELETE TASK
BACK EXIT
z
STOP: Here is to stop current pattern. Input pattern number, move the cursor to STOP and click confirm
button. System stops current pattern.
z
BACK: Go back to previous menu.
z
EXIT: Log out system menu.
Note:
z
The dwell time between two orders should be less than one minute, otherwise system will set to default
value as one minute.
z
After click PROGRAM
STOP, do not click CALL button before icon
“
●”
disappears completely.
z
Any manual operation during the pattern procedure will terminate current dome pattern operation.
2.4.4.6
Idle Function
When there is no available command for specified time, dome automatically goes on the previous set
functions.
z
IDLE
FUNCTION
：
There are two modes ON/OFF. Please use left/right key to set.
z
IDLE TIME: System idle period. Please use the left/right button on the keyboard or in the speed dome
terminal menu to set.
z
IDLE ACTION
：
There are several functions you can select:
NONE/PRESET/SCAN/TOURING/PATTERN. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
z
PARAMETER: It is to set idle motion SN. System can implement the corresponding action when it is
idle for the specified period. Click the left/right button to set.
z
SAVE
：
Move the cursor to SAVE and click confirm button to save current setup.
z
BACK: Go back to previous menu.
2.4.4.7
Time Task (Schedule task)
z
TASK NO: Here you can set task number. Please use the left’/right button to set.
z
TIME TASK: The schedule task allows the speed dome to implement corresponding setup during the
specified time. There are two options: on/off. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.
z
TASK SETTING: Here you can set task time, operation, operation SN and etc. Please click the confirm
button to go to the fourth menu to set.
z
TASK INFORMATION: Here you can view the corresponding task information. Please click the confirm
button to go to the fourth menu to set.