![OnStream SC30 Скачать руководство пользователя страница 12](http://html1.mh-extra.com/html/onstream/sc30/sc30_getting-started-installation-and-use-manual_1638613012.webp)
8
Getting Started
7.
Slide your OnStream Digital Tape Drive into the empty drive bay as shown in
Figure 6. You can mount your OnStream Digital Tape Drive horizontally or
vertically as necessary.
Figure 6: Slide your OnStream Digital Tape Drive into an empty drive bay.
Connecting the Cables
Connect the power and SCSI cables to your OnStream Digital Tape Drive before
securing it in the drive bay. You may need to slide the drive to the front or back
of the drive bay to connect the cables.
Connecting the Power Cable
1.
Locate a spare power connector inside your computer. If you are having diffi-
culty locating a power connector, find your computer’s power supply and follow
the bundle of wires that come out of it. Your OnStream Digital Tape Drive
requires a small power connector like the one shown in Figure 7.
Figure 7: Power connector required for your OnStream Digital Tape Drive
Power connectors have 4-pins, are usually white plastic, and have two black
wires, one red wire, and one yellow wire.
2.
Connect the power cable to the power connector on the back of your OnStream
Digital Tape Drive as shown in Figure 9.
Remove drive bay
cover
Slide the drive
into the empty
bay
SCSIGSGuide.book Page 8 Tuesday, January 19, 1999 1:02 PM