Onset hobo u30, Руководство пользователя

Страница: 103 / 108

Onset Computer Corporation
User’s Guide - 103 - HOBO U30 Station/RC
Task 6: Mount Logger to Upper Mast
1. Using the two 1-5/8 inch U-bolt assemblies provided, mount the logger enclosure on the lower end of
the upper mast in line with the upper mast dimple. The lower housing U-bolt can be placed directly
above the U-bolt holding the mast pieces together.
Note: When assembling the U-bolts, place the U-bolts around the upper mast, and install the
saddle clamp. Place the logger enclosure against the saddle clamps and screw on the top U-bolt
nuts only.
Figure 34: Logger Housing on Mast
2. If you are using the Guy Wire kit, position the logger enclosure so that it will not be in the way of guy
wires.
3. Attach the logger’s ground wire to the lower housing U-bolt. Screw on the lower U-bolt nuts and then
tighten all the U-bolt nuts.