Onset
Computer
Corporation
User’s Guide
- 20 -
HOBO U30 Station/RC
F i n a l H O B O l i n k S e t u p a n d T e s t
This topic describes the final HOBOlink setup and system test.
Before You Begin
This procedure assumes that you have completed the Initial HOBOlink Setup (page 17) and Initial
Hardware Setup (page 18).
Steps
1.
If you are not logged into HOBOlink, log into HOBOlink now.
2.
Perform additional HOBOlink configuration if required (Label Sensors, Configure Alarms). See the
HOBOlink Quick Start Guide
or the
HOBOlink Help
for details.
3.
Check the Device Status and the graphs to verify that sensors are reporting correctly and the
HOBO U30 Station is being readout properly.
4.
When you are satisfied that the HOBO U30 Station and HOBOlink are working properly, change your
Logging Interval
and
Connection Interval
to your desired settings for deployment. IMPORTANT:
5.
Repack the logger and sensors for transit.
Onset strongly recommends that you use the original packaging when possible because it is
custom-designed to protect the weather station and its components.
NEXT TASK
: Installing the U30 Station in the Field (page 27).
Содержание hobo u30
Страница 1: ......
