Onset Computer Corporation
HOBO U14
4
User’s Guide
Components
Front
LCD Screen
See LCD Indicators on page 15.
USB Port
Use an Onset-supplied USB interface cable to connect the HOBO U14 to a computer.
External Sensor Port (Model 002 Only)
Connect supported Smart Sensor here.
Back
Mounting Holes
Use mounting screws 2.5 cm (1 inch) apart to mount the U14 to a wall.
Battery Compartment
The HOBO U14 requires three AAA batteries. Onset Computer Corporation strongly recommends the use of fresh alkaline batteries.
Batteries should be replaced when the BATT LEVEL bar graph is down to one segment, which indicates 20% battery life or less.
