Onset Computer Corporation
HOBO U14
10
User’s Guide
Reading Out the HOBO U14
NOTE
: If you use the U-Shuttle to readout the logger, see the U-Shuttle User Manual for specific instructions.
To off-load data from the HOBO U14:
1.
Optional - Disconnect the logger from the external sensor, Remote Alarm or Automatic Dialer.
2.
Transport the logger to the location of the computer.
3.
Connect the logger to the computer.
4.
Run HOBOware software on the computer.
5.
Optional - If you have more than one logger connected to the computer, connect to the HOBO U14 by selecting
Device
>
Select
and
then select the HOBO U14 from the
Select Device
window.
6.
From the main menu, click the
Readout
icon (or select
Device
>
Readout
from the main menu).
7.
If the logger is currently logging, you can choose to continue logging while offloading or stop logging.
The readout will begin. The status bar in the
Readout Logger
window will indicate the percentage complete.
8.
When prompted, enter a name for the file and click Save.
The
Plot Setup
Dialog appears.
9.
Click
Plot
to view the graph of the data.
See the HOBOware User Manual or On-line Help for more details on graphing, time selection in plots, and exporting data files.
10.
To redeploy the logger, re-launch it with a delayed start allowing enough time to return the logger to the site, reconnect external
devices if any (External Sensors, Remote Alarm, Automatic Dialer).
