3
4) Have ON/OFF manual switch key.
5) LED indicator.
6) Max. remote range 30m in open area.
2.
Diagram
LED
LEARN KEY
ON/OFF KEY
3.
Operation
1) Switch off the appliance
2) Plug the appliance into the socket of the receiver then connect the receiver with power supply.
3) Switch on the appliance
4.
Channel-select
Press and hold“LEARN” key on Wireless Switch Receiver about 3 seconds until LED flash
，
enter channel-select state;time of
the channel-select state will keep about 15 seconds,now press the key on Transmitter,the LED on Wireless Switch Receiver will
stop flash if channel-select succeed.it will exit the channel-select state after 15 seconds if channel-select defeated.If the cancel
channel-select,repeat the above again.
5.
ON/OFF
1)
Press“ON/OFF” key,red LED lighting means the output power is on.
2)
Press“ON/OFF” key again, red LED no light means the output power is off.
6.
Specification
1)
Power supply: 230VAC, 50Hz,
2)
Max. Load:16(2)A,3600W
3)
Radio Frequency: 433.05-434.79MHz
4)
Max. Range: 30m in open area
5)
IP44
6)
Transmitter duty cycle>10%
7)
Receiver category: Class 3
Warning
1)
For outdoor using with IP44, at temperatures between -25°C~+35°C.
2)
Only to be used in wall-mounted sockets, do not connect to an extension cord.
This marking indicates that this product should not be disposed with other household wastes throughout the EU.
To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to
promote the sustainable reuse of material resources.
To return your used device, please use the return and collection systems or contact the retailer where the product was
purchased. They can take this product for environmental safe recycling.
