Onkyo TX SR806, Инструкция по эксплуатации

Страница: 24 / 124

24
Connecting the AV Receiver/AV Amplifier
—Continued
■
“Monitor Out” Setting Set to “Analog”
With the “Monitor Out” setting set to “Analog”
(see page 41), video input signals flow through
the AV receiver/AV amplifier as shown, with
composite video and S-Video sources being
upconverted for the component video output.
Use this setting if you connect the AV
receiver/AV amplifier’s COMPONENT
VIDEO MONITOR OUT to your TV.
Composite video is upconverted to S-Video and
S-Video is downconverted to composite video.
Note that these conversions only apply to the
MONITOR OUT V and S outputs, not the
VCR/DVR OUT V and S outputs.
The composite video, S-Video, and component
video outputs pass through their respective input
signals as they are.
This signal flow also applies when the “Output Res-
olution” setting is set to “Through” (see page 94).
Video Signal Flow and the Resolution Setting
When the “Monitor Out” setting is set to “Ana-
log” (see page 41), if the “Output Resolution”
setting is set to anything other than “Through”
(see page 94), the video signal flow will be as
shown here, with composite video and S-Video
sources being upconverted for the component
video output.
The composite video, S-Video, and component
video outputs pass through their respective ana-
log input signals as they are. HDMI input signals
are not output.
Audio Connection Formats
Audio equipment can be connected to the AV
receiver/AV amplifier by using any of the follow-
ing audio connection formats: analog, optical,
coaxial, analog multichannel, or HDMI.
When choosing a connection format, bear in
mind that the AV receiver/AV amplifier does not
convert digital input signals for analog line out-
puts and vice versa. For example, audio signals
connected to an optical or coaxial digital input
are not output by the analog TAPE OUT.
If signals are present at more than one input, the
inputs will be selected automatically in the following order of priority: HDMI, digital, analog (including multichannel).
You can specify which audio inputs the AV receiver/AV amplifier checks for the presence of a signal in the “Automatic
Audio Input Selection Setup” on page 98.
IN
MONITOR OUT
DVD player, etc.
AV receiver/
AV amplifier
TV, projector, etc.
Composite
Composite
S-Video
S-Video
Component
Component
Video Signal Flow Chart
HDMI
HDMI
IN
MONITOR OUT
DVD player, etc.
AV receiver/
AV amplifier
TV, projector, etc.
Composite
Composite
S-Video
S-Video
Component
Component
Video Signal Flow Chart
HDMI
HDMI
IN
OUT
DVD player, etc.
AV receiver/
AV amplifier
MD recorder, etc.
HDMI Coaxial Analog
Audio Signal Flow Chart
Multichannel
HDMI Analog
Optical
*1 Depends on the “Audio TV Out” setting
(see page 95).
*2 Only the front L/R channels are output.
(There will be no down mix.)
TX-SR806_En.book Page 24 Monday, August 4, 2008 10:25 AM