DEBUG MODE-5
HDMI DEBUG MODE-1/2
TX-SR507/SR577/DTR-20.1
HDMI-related operations can be checked to some extent by displaying HDMI Debug Mode.
If a trouble of HDMI video occurs, first display this mode and try to find out the cause and remdy.
To enter this mode
Hold down
DISPLAY
DISPLAY
button for
3
seconds. Information display will last for about 8 seconds.
Segment No. of FL Display
FL Display
1
4
3
2
9
12
11
10
6
7
8
5
14
13
0
Video Input Format
Status Description
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
Source Device Video Format : OK,
Sink Device EDID : OK
i/p/I/P
Source Device Video Format : OK
Sink Device Hot plug : Low
Source Device Video Format : OK
Sink Device HDCP Authentication : Fail
Source Device Video Format : OK
Sink Device Resolution : Error
Source Device Video Format : OK
Sink Device EDID Reading : Error
Source Device Video Format : OK
Sink Device :
Busy(Cannot accept HDMI signal)
Normal Source
Video Formats
Output Resolution
Input Resolution
Frame Rate
i/p/I/P
Normal State
Error State ---> Remedy
1
Blinks
Error State ---> Remedy
2
Error State ---> Remedy
3
Error State ---> Remedy
Error State ---> Remedy
4
Error mark
Error mark
Error mark
i/p/I/P
i : HDMI, Interlace
p : HDMI, Progressive
I : DVI, Interlace
P : DVI, Progressive
/6 : 60 frame/sec
/5 : 50 frame/sec
Frame Rate
: Analog input
: HDMI input
Video signal input
Progressive/ Interlace
i/p/I/P
Output Resolution
Input Resolution
Frame Rate
i/p/I/P
Description --->
Description --->
Display --->
(Example)
FL segment No. --->
FL segment No. --->
5
Input/Output State and Example of FL Display
