DEBUG MODE-6
HDMI DEBUG MODE-2/2
TX-SR507/SR577/DTR-20.1
Source Device PC Video Format :
OK
,
Sink Device EDID :
OK
i/p/I/P
Source Device PC Video Format :
OK
,
Sink Device Hot plug :
Low
Source Device PC Video Format :
OK
,
Sink Device HDCP Authenification :
Fail
Source Device PC Video Format :
OK
,
Sink Device EDID Reading :
Error
VGA input via DVI-HDMI conversion cable
VGA input via HDMI cable
Source Video Format:
PC Format
Frame Rate
Input
Horizontal Resolution
Input
Vertical Resolution
Normal State
Normal State
Normal State
Error State ---> Remedy
8
Error State ---> Remedy
10
Error State ---> Remedy
9
Video Input Format
Status Description
0
1
2
3
4
5
6
7
8
9
10
11
12
13
14
FL segment No. --->
Description --->
NOTE:
1. 1920x1080/24Hz can be displayed in Through Mode only.
2. 640x480p/60 is displaed as “VGA” instead of itself.
Remedy for Error State
Remedy No.
Remedy
The most possible cause is the hardware trouble of Sink device. Fix it.
Refer to HDCP and Authentification error in “
DEBUG MODE-7
”. Follow the procedure.
Refer to Resolution error in “
DEBUG MODE-7
”. Follow the procedure.
Refer to EDID error in “
DEBUG MODE-7
”. Follow the procedure.
Check other HDMI Inputs of AV receiver. If NG, the most possible cause is the hardware trouble of Sink device. Fix it.
The most possible cause is the hardware trouble of Sink device. Fix it.
The same as .
The same as .
1
2
3
4
8
10
9
5
2
4
Blinks
Error mark
Error
Input/Output State and Example of FL Display(Continued)
