48
En
■
Dolby D/Dolby D +/TrueHD
With this setting, you can specify the listening mode to
be used when a Dolby Digital or Dolby Digital Plus for-
mat digital audio signal is played (DVD, etc.). Specifies
the default listening mode for Dolby TrueHD sources,
such as Blu-ray or HD DVD (input via HDMI).
■
DTS/DTS-ES/DTS-HD
With this setting, you can specify the listening mode to
be used when a DTS or DTS-HD High Resolution for-
mat digital audio signal is played (DVD, LD, CD, etc.).
Specifies the default listening mode for DTS-HD Mas-
ter Audio sources, such as Blu-ray or HD DVD (input
via HDMI).
■
Other Multich Source
Specifies the default listening mode for multichannel
PCM sources from
HDMI IN
such as DVD-Audio, and
DSD multichannel sources such as Super Audio CD.
Main menu
Miscellaneous
Volume Setup
■
Volume Display
`
Absolute:
Display range is “
Min
”,
1
through
99
, “
Max
”.
`
Relative (THX):
Display range is
–
Q
dB
,
–81dB
through
+18dB
.
With this setting, you can choose how the volume level is
displayed.
The absolute value 82 is equivalent to the relative value
0 dB.
■
Muting Level
`
–
Q
dB
(fully muted),
–50dB
to
–10dB
in 10 dB steps.
This setting determines how much the output is muted
when the muting function is used (
➔
22
).
■
Maximum Volume
`
Off
,
50
to
99
(Absolute display)
`
Off
,
–32dB
to
+17dB
(Relative display)
With this setting, you can limit the maximum volume.
To disable this setting, select “
Off
”.
■
Power On Volume
`
Last
,
Min
,
1
to
99
or
Max
(Absolute display)
`
Last
,
–
Q
dB
,
–81dB
to
+18dB
(Relative display)
With this preference, you can specify the volume set-
ting to be used each time the AV receiver is turned
on.
To use the same volume level that was used when the AV
receiver was turned off, select “
Last
”.
The “
Power On Volume
” cannot be set higher than the
“
Maximum Volume
” setting.
■
Headphone Level
`
–12dB
to
0dB
to
+12dB
With this preference, you can specify the headphone vol-
ume relative to the main volume. This is useful if there’s a
volume difference between your speakers and your head-
phones.
OSD Setup
■
On Screen Display
This preference determines whether operation details
are displayed on-screen when an AV receiver function is
adjusted.
`
On
:
Displayed.
`
Off
:
Not displayed.
Even when “
On
” is selected, operation details may not be
output if the input source is connected to an
HDMI IN
.
■
TV Format (European models)
For the on-screen setup menus to display properly, you
must specify the TV system used in your area.
`
Auto
:
Select this to automatically detect the TV system
from the video input signals.
`
NTSC
:
Select this if the TV system in your area is NTSC.
`
PAL
:
Select this if the TV system in your area is PAL.
■
Language
`
English
,
Deutsch, Français, Español, Italiano, Ned-
erlands, Svenska,
中文
This setting determines the language used for the on-
screen setup menus.
Miscellaneous
Содержание HT-R980
Страница 146: ...74 Fr M mo...
Страница 147: ...75 Fr M mo...