TX-SR606
OPERATION CHECK-3
SPEAKER PROTECT-3
T e s t - _
T e s t - 4 - 0 0
Current detection check
[When]
1. Exchange power transistors (Q6050 - Q6056, Q6060 - Q6066).
2. Exchange amplifier PC board ass'y (NAAF-9424).
[Procedure]
Notes :
No input.
Do not check two or more channels at the same time.
Do not connect a dummy load to speaker terminal longer than 2 seconds.
1. Press and hold down
CD
button, then press
ON/STANDBY
button while the unit is powered on.
"
Test - _
"
is displayed only for 5 seconds.
2. Press
GAME/TV
button, while
"
Test - _
"
is displayed.
The unit will be in the state of
"
Test-4-00
".
3. Repeatedly press
+
(
TONE)
button until
"
Test-4-35
"
is displayed.
The shape of wave form of <Fig-1> is output from the speaker terminal in this state.
4. Connect the dummy load of 3 ohms to the Front L ch speaker terminals.
At this time, confirm that the speaker relay is not turned off.
5. Connect the dummy load of 1 ohm to the Front L ch speaker terminals.
At this time, confirm that the speaker relay is turned off and
"
Protect
"
is displayed.
Disconnect the dummy load immediately after checking the display of
"
Protect
".
6. Check other channels according to the same procedure as 4 and 5.
T e s t - 4 - 3 5
C l e a r
Turn off
T e s t - 4 - 3 5
P r o t e c t
T e s t - 4 - 3 5
Blinks
FL Display
20 mS
2 mS 2 mS
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299