TX-SR606
IC BLOCK DIAGRAMS AND TERMINAL DESCRIPTIONS-21
Q8001
: FLI30502
(LCD TV Controller with Worldwide Standard Sound Processor
and HDMI Receiver)-3/12
TERMINAL DESCRIPTION
Analog input port
I/O
AP
AG
AP
AI
AG
AG
AG
AI
AP
AI
AP
AI
AG
AI
AG
AI
AG
AI
AG
AI
AP
AI
AG
AI
AG
AI
AG
Description
Analog Power (1.8V) for ABC & SYNC Channel. Must be bypassed with 0.1 uF capacitor to the
analog system ground plane.
Analog Ground (1.8V Return) for ABC & SYNC channel. Must be directly connected to the
analog system ground plane.
Analog Power (3.3V) for ADC. Must be bypassed with 0.1uF capacitor to the analog
system ground plane.
Sound Intermediate frequency input 2.
Analog ground. Must be directly connected to the analog system ground plane on board.
Analog ground. Routed through 56E to the analog system ground plane on board.
Analog ground. Must be directly connected to the analog system ground plane on board.
Sound Intermediate frequency input 1.
Analog Power (3.3V) for ADC. Must be bypassed with 0.1uF capacitor to the analog
system ground plane.
Positive analog input for channel 1. The input has to be AC coupled using a series 20 resistor
and 0.1uF Capacitor network.
Analog Power (3.3V) for ADC. Must be bypassed with 0.1uF capacitor to the analog
system ground plane.
Positive analog input ‘A’ for channel 1. The input has to be AC coupled using a series 20 resistor
and 0.1uF Capacitor network.
Analog ground. Must be directly connected to the analog system ground plane on board.
Positive analog input‘B’ for channel 1. The input has to be AC coupled using a series 20 resistor
and 0.1uF Capacitor network.
Analog ground. Must be directly connected to the analog system ground plane on board.
Positive analog input ‘C’ for channel 1. The input has to be AC coupled using a series 20 resistor
and 0.1uF Capacitor network.
Analog ground. Must be directly connected to the analog system ground plane on board.
Negative analog input ‘A’ for channel 1 through 4. This acts as the return Path for the Sources
connected to channel -A Inputs. This has to be AC coupled using a series 57.6 ohm resistor and
0.1uF capacitor network to Analog Ground Plane on board.
Analog ground. Must be directly connected to the analog system ground plane on board.
Positive analog input for channel 2. The input has to be AC coupled using a series 20 resistor
and 0.1uF Capacitor network.
Analog Power (3.3V) for ADC. Must be bypassed with 0.1uF capacitor to the analog
system ground plane.
Positive analog input ‘A’ for channel 2. The input has to be AC coupled using a series 20 resistor
and 0.1uF Capacitor network.
Analog Power (3.3V) for ADC. Must be bypassed with 0.1uF capacitor to the analog
system ground plane.
Positive analog input ‘B’ for channel 2. The input has to be AC coupled using a series 20 resistor
and 0.1uF Capacitor network.
Analog ground. Must be directly connected to the analog system ground plane on board.
Positive analog input ‘C’ for channel 2. The input has to be AC coupled using a series 20 resistor
and 0.1uF Capacitor network.
Analog ground. Must be directly connected to the analog system ground plane on board.
Pin Name
VDD18_ABC_SC
GND18_ABC_SC
VDDA
SIF_RTN
GNDA
SIF_RTN
GNDA
SIF_IN1
VDDA
SV1P
VDDA
A1P
GNDA
B1P
GNDA
C1P
VDDA
B2P
GNDA
C2P
GNDA
Pin #
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
230
231
232
233
234
<Note>
I/O
Legend : A = Analog, I = Input, O = Output, P = Power, G = Ground, D = Digital
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299