73
En
■
How to connect and setup
1
Confirm the connection and settings.
1. Connect the
HDMI OUT
jack to the HDMI input
jack of the TV.
2. Connect the audio output from the TV to the
OPTICAL IN 2
jack of the AV receiver using
an optical digital cable.
Note
• When the audio return channel (ARC) function is used
with an ARC capable TV, this connection is not necessary
(
3. Connect the HDMI output of the Blu-ray
Disc/DVD player/recorder to the
HDMI IN 1
jack of the AV receiver.
Note
• It is necessary to assign the HDMI input when connecting
the Blu-ray Disc/DVD player/recorder to other jacks
(
). Do not assign the components connected to
the HDMI IN to the TV/CD input at this time. Appropriate
CEC (Consumer Electronics Control) operation can not be
guaranteed.
2
Change each item in the “HDMI Setup” menu
according to the following settings:
•
HDMI Ctrl (RIHD)
:
On
•
Audio Return Ch
(ARC):
Auto
See details of each setting (
Blu-ray Disc/DVD player, etc.
AV receiver
TV, projector, etc.
DIGITAL AUDIO
connection
(OPTICAL)
HDMI
connection
HDMI
connection
3
Confirm the settings.
1. Turn on the power for all connected
components.
2. Turn off the power of the TV, and confirm that
the power of the connected components is turned
off automatically with the link operation.
3. Turn on the power of the Blu-ray Disc/DVD
player/recorder.
4. Start playback on the Blu-ray Disc/DVD
player/recorder, and verify the following:
• The AV receiver automatically turns on, and
selects the input to which the Blu-ray
Disc/DVD player/recorder is connected.
• The TV automatically turns on, and selects the
input to which the AV receiver is connected.
5. Following the operating instructions of the TV,
select “Use the TV speakers” from the menu
screen of the TV, and confirm that the audio is
output from the speakers of the TV, and not from
the speakers connected to the AV receiver.
6. Select “Use the speakers connected from the AV
receiver” from the menu screen of the TV, and
confirm that the audio is output from the
speakers connected to the AV receiver, and not
from the TV speakers.
Note
• Perform the above operations when you use the AV
receiver for the first time, when the settings of each
component are changed, when the main power of each
component is turned off, when the power cable is
disconnected from the power supply, or when there has
been a power outage.
4
Operate with the remote controller.
For buttons that can be operated (
Note
• Audio from DVD-Audio or Super Audio CD may not
output from the TV speakers. You will be able to output
the audio from the TV speakers by setting the audio output
of the DVD player to 2ch PCM. (It may not be possible
depending on the player models.)
• Even if you set to output audio on the TV speakers, audio
will be output from the speakers connected to the AV
receiver when you adjust the volume or switch the input
on the AV receiver. To output audio from the TV
speakers, re-do the corresponding operations on the TV.
• In case of a
p
connection with
u
and
u
audio
control compatible components, do not connect the RI
cable at the same time.
• On the TV, when you select anything other than the HDMI
jack to which the AV receiver is connected, the input on
the AV receiver will be switched to “
TV/CD
”.
• The AV receiver will automatically power on in
conjunction when it determines it to be necessary. Even if
the AV receiver is connected to an
p
compatible
TV or player/recorder, it will not power on if it is not
necessary. It may not power on in conjunction when the
TV is set to output audio from the TV.
• Linked functions with the AV receiver may not work
depending on the component model connected. Operate
the AV receiver directly in such cases.
Содержание HT-R648
Страница 75: ...75 En Memo...
