Onkyo HT-R648, Инструкция по эксплуатации

Страница: 57 / 76

57
En
You can reset a REMOTE MODE to its default remote
control code.
You can reset the remote controller to its default settings.
By pressing REMOTE MODE that’s been programmed
with the remote control code for your component, you can
control your component as below.
For details on entering a remote control code for a
different component (
➔
page 56 ).
Controlling a TV
TV is preprogrammed with the remote control code for
controlling a TV that supports the
p
*1
(limited to
some models). The TV must be able to receive remote
control commands via
p
and be connected to the
AV receiver via HDMI. If controlling your TV via
p
doesn’t work very well, program your TV’s
remote control code into TV and use the TV remote mode
to control your TV.
Use the following remote control codes:
`
11807/13100/13500 :
TV with
p
Controlling a Blu-ray Disc/DVD Player, HD
DVD Player or DVD Recorder
BD/DVD
is preprogrammed with the remote control code
for controlling a component that supports the
p
*1
.
The component must be able to receive remote control
commands via
p
and be connected to the AV
receiver via HDMI.
Use the following remote control codes:
`
32910/33101/33501/31612 :
Blu-ray Disc/DVD player with p
*1 The p supported by the AV receiver is the CEC
system control function of the HDMI standard.
Resetting REMOTE MODE Buttons
1
While holding down the REMOTE MODE that you
want to reset, press and hold down HOME until the
remote indicator lights (about 3 seconds).
2 Within 30 seconds, press the REMOTE MODE
again.
The remote indicator flashes twice, indicating that the
button has been reset.
Each of the
REMOTE MODE is preprogrammed
with a remote control code. When a button is reset, its
preprogrammed code is restored.
Resetting the Remote Controller
1
While holding down RECEIVER , press and hold
down HOME until the remote indicator lights
(about 3 seconds).
2 Within 30 seconds, press RECEIVER again.
The remote indicator flashes twice, indicating that the
remote controller has been reset.
Controlling Other Components