Onkyo HT-R2295, Руководство пользователя

Страница: 48 / 100

Advanced Operations
En-48
Note
• These settings cannot be calibrated in either of the following
cases:
– A pair of headphones is connected.
– The AV receiver is muted.
• Speakers that are set to “ No ” or “ None ” in the “4. Sp Config
(Speaker Configuration)” (
➔
page 39 ) cannot be adjusted.
Audyssey ®
■
Audyssey
See
“Audyssey”
in “8. Source Setup” (
➔
page 42
).
■
Dynamic EQ
See
“Dynamic EQ”
in “8. Source Setup” (
➔
page 43
).
■
Dynamic Volume
See
“Dynamic Volume”
in “8. Source Setup” (
➔
page 43
).
Note
• These technologies can be used when all the following conditions
are met:
– Room Correction and Speaker Setup is completed. Note that
“ Audyssey ” requires the “ Audyssey 2EQ Full Calibration ”
method.
– Any listening mode other than Direct is selected.
– A pair of headphones is not connected.
– The input selector other than
USB is selected.
• The setting is stored individually for each input selector.
Late Night
■
Late Night
For Dolby Digital and Dolby Digital Plus sources, the
options are:
`
Off
`
Low :
Small reduction in dynamic range.
`
High :
Large reduction in dynamic range.
For Dolby TrueHD sources, the options are:
`
Auto :
The Late Night function is set to “ On ” or “ Off ”
automatically.
`
Off
`
On
Turn this setting on to reduce the dynamic range of Dolby
Digital material so that you can still hear quiet parts even
when listening at low volume levels—ideal for watching
movies late at night when you don’t want to disturb
anyone.
Note
• The effect of the Late Night function depends on the material that
you are playing and the intention of the original sound designer,
and with some material there will be little or no effect when you
select the different options.
• The Late Night function can be used only when the input source
is Dolby Digital, Dolby Digital Plus, or Dolby TrueHD.
• The Late Night function is set to “ Off ” when the AV receiver is
set to standby. For Dolby TrueHD sources, it will be set to
“
Auto ”.
Music Optimizer
■
Music Optimizer
`
Off
`
On
The Music Optimizer function enhances the sound quality
of compressed music files. The
M.Opt indicator lights on
the AV receiver’s display.
Tip
• Alternatively, you can use the AV receiver’s MUSIC
OPTIMIZER .
Note
• The Music Optimizer function only works with PCM digital
audio input signals with a sampling rate below 48 kHz and analog
audio input signals.
• The Music Optimizer is disabled when the Direct listening mode
is selected.
• The setting is stored individually for each input selector.
CinemaFILTER
■
Cinema Filter
`
Off
`
On
Turn this setting on to soften overly bright movie
soundtracks, which are typically mixed for reproduction in
a movie theater.
CinemaFILTER can be used with the following listening
modes: Dolby Digital, Dolby Digital EX, Dolby Digital
Plus, Dolby TrueHD, Dolby Pro Logic IIx Movie, Dolby
Pro Logic II Movie, Dolby Pro Logic IIz Height,
Multichannel, DTS, DTS-ES, DTS Neo:6 Cinema, DTS
96/24, Neo:6, DTS-HD High Resolution Audio, DTS-HD
Master Audio and DTS Express.
Note
• The CinemaFILTER may not work when used with certain input
sources.