Onkyo HT-R2295, Руководство пользователя

Страница: 42 / 100

Advanced Operations
En-42
■
PL IIz Height Gain
`
Low
`
Mid
`
High
The Height Gain Control in Dolby Pro Logic IIz enables
the listener to select how much gain is applied to the front
high speakers. There are three settings, “
Low ”, “ Mid ” and
“ High ”, and the front high speakers are accentuated in that
order. While “ Mid ” is the default listening setting, the
listener may adjust the Height Gain Control to their
personal preference.
Note
• If the “ Front High ” setting is set to “ None ” (
➔
page 39 ), this
setting cannot be selected.
• If the “ Powered Zone 2 ” setting is set to “ Yes ” and Zone 2 is
turned on, this setting cannot be selected.
■
Dolby EX
`
Auto :
If the source signal contains a Dolby EX flag, the
Dolby EX listening mode is used.
`
Manual :
You can select any available listening mode.
This setting determines how Dolby EX encoded signals are
handled. This setting is unavailable if no surround back
speakers are connected. This setting is effective with
Dolby Digital, Dolby Digital Plus and Dolby TrueHD only.
Note
• If the “ Surround Back ” setting is set to “ None ” (
➔
page 39 ),
this setting cannot be selected.
• If the “ Powered Zone 2 ” setting is set to “ Yes ” and Zone 2 is
turned on, this setting cannot be selected.
DTS
■
Neo:6 Music
Center Image
`
0 to 2 to 5
The DTS Neo:6 Music listening mode creates 6-channel
surround sound from 2-channel stereo sources. With this
setting, you can specify by how much the front left and
right channel output is attenuated in order to create the
center channel.
Changing the value from “
0 ” to “ 5 ” will spread the sound
of the center channel to left and right (outwards).
Theater-Dimensional
■
Listening Angle
`
Wide :
Select if the listening angle is greater than 30 degrees.
`
Narrow :
Select if the listening angle is less than 30 degrees.
With this setting, you can optimize the Theater-
Dimensional listening mode by specifying the angle of the
front left and right speakers relative to the listening
position. Ideally, the front left and right speakers should be
equidistant from the listening position and at an angle close
to one of the two available settings.
Note
• For best results, we recommend setting “ Narrow ” to 20° and
“ Wide ” to 40°.
Items can be set individually for each input selector.
Menu Source Setup
Audyssey ®
■
Audyssey
`
Off
`
Movie :
Select this setting for movie material.
The
Audyssey indicator lights.
`
Music :
Select this setting for music material.
The
Audyssey indicator lights.
Note
• When “ Audyssey Quick Start ” has been used for measurement,
the “ Audyssey ” cannot be selected.
• Audyssey equalizing does not work for DSD sources.
Front left speaker Front right speaker
Listening angle: 30°
8. Source Setup
Preparation
Press the input selector buttons to select an input source.
The tone for each speaker is set automatically by
Audyssey 2EQ
® Room Correction and Speaker Setup.
To enable the following settings, you must first perform
the Room Correction and Speaker Setup (
➔
page 26
).
• These technologies cannot be used when:
– A pair of headphones is connected, or
– Direct listening mode is selected, or
– The
USB input selector is selected.
1 2 3 4 5 6