n
Selecting subtitles, assist subtitles or no
subtitles
Use this function to turn the subtitles on or off. Additionally,
some
provide assist subtitles that provide additional
explanations of scenes in addition to the standard subtitles for
viewers who are hard of hearing. Select [Assist Subtitle] to
display these subtitles on
where this function is offered.
Make changes to the [Subtitle Display] setting in the Setup
screen Language menu in the [Expert] menu mode (page 47).
You cannot make this setting with a disc playing.
Auto Language On
Settings:
On
(Factory setting)
Off
Assist Subtitle
Notes
If there is no subtitle information recorded on the DVD, no
subtitles are displayed even if this function is set to [On].
. This setting serves as a default as whether or not to display
subtitles. Even if this option is set to [Off], subtitles can be
displayed by pressing SUBTTL. Similarly, if this option is set to
[On], the subtitles can be turned off by pressing SUBTTL and
t h e n C L E A R .
Forcing subtitles to be displayed
Even when the subtitles are turned off, some
will
nevertheless display them on the screen. This setting allows
you to select the language of the subtitles to be displayed with
this type of DVD.
Select [With Audio] to display the subtitles in the same
language as the currently selected [Audio Language]. Select
[Selected Subtitle] to display the subtitles in the language set
in the [Subtitle Language] setting.
Make changes to the [Subtitle Off] setting in the Setup screen
Language menu in the [Expert] menu mode (page 47).
You cannot make this setting with a disc playing.
Audio Language- English
Subtitle Language English
Auto
O n
I
n
When
is selected
When you want to select one of the 136 languages as the
main audio language, follow the steps below when the
following screen appears.
The language code list can be found on page 60.
Use the cursor buttons to select [Other] and press ENTER.
The language selection screen appears.
2
Use the cursor buttons
to select either [List of
Languages] or [Code].
3
If you select [List of Languages], use the cursor buttons (
A
/
to select the language.
For languages which are only shown as a code, please refer to
“Language Code List” on page 60.
List of Languages
ja: Japanese
If you select [Code], use the cursor buttons
to input
the numbers of the input code.
Use the cursor buttons
to change the position of the
cursor. You can also use the number buttons to enter the code.
Code (O-2)
4 Press ENTER to set the new language.
To exit the screen without making any changes, press RETURN.
Settings:
With Audio
Selected Subtitle
(Factory setting)