Onkyo CS-V645, Инструкция по эксплуатации

Страница: 9 / 36

9
En
Caution
• Turn the power off to all components before making
connections.
• Read the instructions of each component you intend to
use with this unit.
• Be sure to insert each plug securely. To prevent hum and
noise, avoid bundling the signal interconnection cables
together with the AC power cord or speaker cables.
• Adjust the video aspect ratio to match that of the
television.
• This unit adopts analog copy protection features. If the
unit is connected to a TV through a VCR (video cassette
recorder), the resulting playback may be affected.
Connect the unit directly to the television.
• In all cases, use the highest quality cables for the best
possible picture.
• Select proper setting in the “ VIDEO SETUP ”.
A
HDMI video/audio output jack
Use an HDMI cable to connect the unit to an HDMI
compatible television or monitor.
• If the television or monitor is equipped only with a DVI
terminal, a suitable adapter cable or adapters should be
used. Note that the television connected in this way must
be HDCP compatible. Also note that this connection
outputs no sound.
• Make sure that you read and understand the
documentation provided with the HDMI component.
■
HDMI video output formats
• 480p (60Hz)
• 576p (50Hz)
• 720p (50Hz) or 720p (60Hz)
• 1080i (50Hz) or 1080i (60Hz)
• 1080p (50Hz) or 1080p (60Hz)
■
To output audio from the HDMI jack
If the connected HDMI component is capable of inputting
HDMI audio, digital audio can be output from the HDMI
jack.
• Only PCM digital audio can be output from the HDMI
jack.
B
Component video output jacks
Use component video cables to connect the unit to the
component video inputs of a suitably equipped television
or monitor to enjoy a high-quality picture. Use these
terminals in preference to composite video connections.
• If the component video terminals are connected to a
television with progressive scan capabilities, the output
can be set to match this.
• Note that these jacks cannot be connected to high
definition component jacks.
C
Composite video output jack
Use a RCA (pin) video cable to connect the unit to the
composite video connector of a television or monitor.
Use this connection only if no other video connection
method is available.
Connection to a TV
A B C
HDMI cab
le
RCA video cab
le
C
o
mponent
vide
o cab
le
TV (Monitor)