G
ROUNDING
I
NSTRUCTIONS
This floor machine must be grounded. If it should
malfunction or breakdown, grounding provides a
path of least resistance for electrical current to
reduce the risk of electric shock. This machine is
equipped with a cord having an equipment-
grounded plug. The plug must be inserted into an
appropriate outlet that is properly installed and
grounded in accordance with all local codes and
ordinances
If repair or replacement of the cord or plug is nec-
essary,
DO NOT
connect the grounding wire to
either flat blade terminal. The wire with insulation
having an outer surface that is green with or without
yellow stripes is the grounding wire.
Improper connection of the equipment-grounding conductor can result in a risk of electrical
shock. Check with a qualified electrician or service person if you are in doubt as to whether the
outlet is properly grounded.
DO NOT
modify the plug provided with the machine. If it will not
fit the outlet, have a proper outlet installed by a qualified electrician.
NOTE:
In Canada, the use of a temporary adaptor is not permitted by
the Canadian Electrical Code.
WARNING:
I
MPORTANT
S
AFETY
I
NSTRUCTIONS
To reduce the risk of fire, electric shock or injury;
Read all instructions before using this floor machine.
WARNING
Page 2
Improper use of the grounding plug can result in a risk of electrical shock.
DANGER:
1) DO NOT
leave the floor machine plugged in
when not in use. Unplug from the outlet when not
in use and/or before servicing.
2)
Electric shock could occur if exposed to rain.
Store indoors.
3)
This is
NOT
a toy. Close attention is necessary
when used around or near children.
4)
Use only as described in this manual. Use only
manufacturer's recommended attachments.
5) DO NOT
use with damaged cord plug. If the
floor machine is not working as it should because
it has been dropped, damaged, left outdoors, or
dropped into water, contact the manufacturer or
authorized service center.
6) DO NOT
pull or carry by cord, use power cord
as a handle, close a door on cord, or pull cord
around sharp edges or corners.
DO NOT
run floor
machine over the cord. Keep cord away from
heated surfaces.
7) DO NOT
handle the plug or operate with wet
hands.
8) DO NOT
put any object into motor openings.
9) DO NOT
unplug by pulling on cord. To
unplug, grasp plug, not the power cord.
10)
Keep hair, loose clothing, fingers and all parts
of body away from moving parts.
11) DO NOT
use an optional vacuum without
the manufacturer’s filters in place.
12) DO NOT
operate where anesthetics and oxy-
gen are used.
13) DO NOT
use around flammable or com-
bustible liquids such as gasoline or use in areas
where they may be present.
14) DO NOT
use an extension cord.
15)
Replace damaged or worn parts immediately
with genuine Grind ’N Go equipment parts to main-
tain safety and protect your limited warranty.
16) Floor sanding can result in an explosive
mixture of fine dust and air. Use a floor sand-
ing machine only in a well ventilated area.
17) DO NOT to leave sawdust in the filter bag
when sander is not in use, this is a fire hazard.
This floor machine must be connected to a
properly grounded outlet only. (See ground-
ing method below.)
