20
CARING FOR YOUR SYSTEM
Caring for your system
Replacing the battery
Your OneTouch® UltraMini® Meter uses one 3.0 Volt CR 2032 lithium battery (or equivalent). Replacement batteries can be found in
most stores where batteries are sold. Your meter comes with the battery already installed. A battery icon appears in the far right-
hand side of the meter display to indicate low battery.
When there is enough power for a minimum of 100 more tests, the battery icon
will appear.
After each test and when reviewing past results, the battery icon will now flash to
remind you to change the battery as soon as possible.
When the battery icon is flashing by itself on the display,
you cannot perform a
test
. You must install a new battery before using your meter.
Replacing the battery
Remove the old battery
Start with the meter off. Open the battery door and pull up on the battery ribbon.
