background image

19

CONTROL SOLUTION TESTING

Press 

 so that the control solution test symbol 

CtL

 appears in the upper right corner of the 

display. You must mark the test before you apply control solution. Once you have completed 
the test, you cannot change the marking. The meter is now ready to perform a control solution 
test. If you decide not to do a control solution test, press 

 again to remove 

CtL

 from the 

display.

 Prepare and apply control solution

Shake the control solution vial before each test. Remove the cap and squeeze the vial to 
discard the first drop. Then wipe the tip with a clean tissue or cloth. Hold the vial upside 
down and gently squeeze a hanging drop. Touch and hold the hanging drop of control 
solution to the narrow channel in the top edge of the test strip. Make sure the confirmation 
window fills completely. Control solution should not be applied to the flat face of the test 
strip.

 Read your result

When the confirmation window is full, the meter will count down from 5 to 1. Your result will then 
appear on the display, along with 

CtL

 and the unit of measure.

 Check if the result is in range

Compare the result displayed on the meter to the control solution range printed 

on the test strip vial

. Each vial of 

test strips may have a different control solution range. If the results you get are not within this range, the meter and 
test strips may not be working properly. Repeat the control solution test.

Out-of-range results may be due to:
  •  not following the instructions detailed in steps 1–7,
  •  expired or contaminated control solution,
  •  expired or damaged test strip,
  •  use of a test strip or control solution past its discard date, or
  •  a problem with the meter.

 CAUTION:

 The control solution range printed on the test strip vial is for OneTouch® Ultra® Control Solution only. It is not a 

recommended range for your blood glucose level. 

 CAUTION: 

If you continue to get control solution results that fall outside the range printed on the test strip vial, 

Do Not

 use the 

meter, the test strips, or the control solution. Call the OneTouch® Customer Care Line at 1 800 663-5521.

Confirmation 

Window

5.5–7.4 mmol/L

(Example)

Top 

Edge

Narrow Channel

Apply drop here

Содержание ONETOUCH ULTRAMINI - MANUAL 2
































Отзывы: