6
The RTTP function is a great ally for the musician as it
allows fast and accurate adjustments of DELAY TIME in
real time.
To enable the RTTP function in your DGD-2 the mode
switch must be switched to DELAY position. After that,
please refer to the instructions below.
Depress and hold the pedal switch for about 2 seconds.
If the indicator led of your DGD-2 is turned off, it will
turn on in green. If the DGD-2 is already turned on in
DELAY mode the indicator led will change its color to
green. This indicates that now you are using the DGD-2
under TAP TEMPO function.
The RTTP mode gives you the ability to change the
Delay Time by using your foot. Your hands will be free
to play without being concerned about the DELAY TIME
knob.
Now it is quite simple! While working in RTTP mode, to
increase or decrease the DELAY TIME, you just need to
depress the pedal three times in the same speed that
you would wish to set up the new Delay Time. The internal
DGD-2 circuitry can read the speed you stomped in real
time and will assume this speed as the new Delay Time
set.
If you wish to change it again, just depress three times
in the new speed you desire. You can change any time
you want while working in RTTP mode. To turn the effect
off simply depress and hold it for 2 seconds. This will
switch the DGD-2 to bypass mode.
The Real Time Tap Tempo (RTTP)