17
Chapter 3:
Using Easy Print Mode
O’Neil Programming Language Reference Manual
Easy Print Commands: General Guidelines
Use the following guidelines when entering Easy Print commands:
•
Easy Print commands appear as
{Command:Information}
where
Information
indicates a set of instructions needed by the printer to carry out a command. Not all
Easy Print commands require a set of instructions to carry out a command. Some
commands, such as
{LP}
, contain only a few characters with no additional
instructions. To determine if a command needs additional instructions, see the specific
Easy Print command on
•
Some Easy Print commands, such as the Print command, require a complex set of
instructions to carry out a command. For more information about the Print command,
see
Easy Print: Using the Print Command
•
If the printer is asleep, null characters must precede Easy Print or Line Printer
commands. If the printer is awake in either mode, do not precede a command with
null characters.
•
Always use Easy Print mode for graphics that are used multiple times, such as a
company logo.
•
Do not insert spaces in a command unless they are part of the
data
. For information
on the
data
Easy Print: Using the Print Command
•
All commands must be entered in uppercase.
Sample Easy Print Job
Note 1:
This chapter assumes a basic knowledge of computer programming and is
designed to be used by programmers, software engineers, and technicians.
Note 2:
To switch between Easy Print and Line Printer modes, enter ESC EZ to go to
Easy Print mode. To switch from Easy Print mode to Line Printer mode, enter {LP}.
Содержание microFlash2
Страница 3: ......
