Oneil microFlash2, Руководство программиста

Страница: 14 / 69

Chapter 2: Using Line Printer Mode
13
O’Neil Programming Language Reference Manual
Note: Use the following Easy Print command to return to Line Printer
mode while in Easy Print mode. {LP} is not a Line Printer command.
If you mistakenly use {LP} while in Line Printer mode, {LP} prints on
your receipt or label.
Format: {LP}
ESC Hn Heighten Font n Times
Format ESC Hn
Dec 27 72 n
Hex 1B 48 n
Function Multiplies the height of the font by n . Must apply to the entire
line.
ESC Q n1n2 Advance n1n2 from Q mark
Format ESC Q n1n2
Dec 27 81 n
Hex 1B 51 n
Function Advances the paper n1n2 dotlines from the Q mark. For
information on the Q mark, refer to Specifications in the
O'Neil Thermal Programming Guide .
ESC R n Select International Character Set
Format ESC R n
Dec 27 82 n
Hex 1B 52 n
Function Select international character sets.
Note: The common IBM Code page 437 with 224 characters
must be used.
0=USA 4=Denmark
1= France 5=Sweden
2=Germany 6=Italy
3=UK 7=Spain
ESC !n Set Double Wide and Double High
Format ESC ! n
Dec 27 33 n
Hex 1B 21 n
Function Selects font height and width for one line. Must apply to
entire line.
n=10h 16d Double high
n=20h 32d Double wide
n=30h 48d Double high and double wide