oneConcept 10039931, Руководство пользователя

Страница: 29 / 108

29
SAFETY INSTRUCTIONS
• Do not disassemble the unit.
• Do not touch the internal parts of the unit if it has been dropped or otherwise
damaged.
• If any problems, such as a strange smell or smoke, occur while using the
appliance, stop using it immediately.
• Never clean the unit with alcohol, petrol, thinner or other organic solutions.
• Do not use the unit in dusty or humid environments.
• To avoid malfunctioning of the photo scanner, do not overload the unit's USB
port.
• Use standard film sizes.
• Cleaning: make sure the appliance is clean before use.
• Unplug the USB cable or adapter from the USB port of the computer if the
unit will not be used for an extended period of time.
• The unit supports SD cards up to a maximum of 128 GB, but we recommend
using an SD card with 16 GB or less, as the unit has to read the SD card in
advance and calculate the capacity of the SD card. Calculating the capacity is
used to find out how many images can be stored on the SD card. The larger
the storage space on the SD card, the longer the calculation will take and the
response speed will be significantly slower. This may even cause the screen of
the unit to freeze. If this is the case, disconnect the power connection. Then
switch the device on again.
• To protect the appliance and save energy, the appliance switches off
automatically after 30 minutes of operation. Press the power button to
continue using the unit.
Note
: Take care when handling films to avoid fingerprints on them (it is
best to wear cotton gloves when handling films). It is recommended to use
compressed cotton if dust is to be removed from the films.