11
Cleaning and Care
fingertips, to test its operation. Once you make contact across 2 wires you will feel the
static pulse.
Once the static training mat senses your touch, it will make a beeping sound and send
static pulses to through the mat for 3 seconds. When an animal steps on the mat and
contacts two wires it will activate the static pulse.
Setting static levels
The static training mat offers three training levels: low, middle and high.
When you change the battery the static training mat remembers the last training mode
used. To change levels, momentarily press and release the pushbutton switch. The LED
will light to indicate the selected training mode.
Training guide
Allow your pets to roam and discover their new boundaries, since all pets are different, it
may take several encounters before they understand and respect the mat. For some pets
this can take a few days. During this learning phase, choose the “Low Static Stimulation”
setting. Do not force your pet onto the mat. Otherwise your pet may associate your ac-
tions with the stimulation rather than with the static training mat. Your pet must learn to
associate the static training mat with the unpleasant stimulation.
CARE AND CLEANING
Unsnap the controller from the mat. The mat may be cleaned with a cloth and mild soapy
water. Rinse and then dry the mat after cleaning. Once the mat is dry, reattach the con-
trols.
Important: do not submerge the electronic controller in water.
Cars
Always place a soft cloth or towel between the car surface and the static training mat.
