10
10
11
12
Insert the mains plug into the
wall socket.
Cut the fruits and vegetables
into pieces that fit into the fee
-
ding tube (7). Put the pieces
of fruit and vegetables into the
feeding tube (7).
Switch on the appliance with
the desired setting.
13
14
15
Use the pusher (8) to press the
pieces of fruit and vegetables
through the feeding tube (7).
Do not exert too much pressure
on the pusher (8) .
If necessary, empty the juice fil
-
ter (5) and the 15 pulp jug (9).
After use, switch off the appli
-
ance, remove the mains plug
from the wall socket and wait
until the appliance has cooled
down.
Switching On/Off
• Do not leave the appliance switched on continuously for more than one minute. After one minute,
switch off the appliance and allow it to cool down for two minutes before switching it on again. Al
-
low the appliance to cool down completely after every three cycles of „one minute on/two minutes
off‘‘.
•
If the appliance stops working, possibly due to its thermal protection system, switch off the appli
-
ance and allow it to cool down for 20-30 minutes before switching it on again.
• To switch on the appliance to continuous low speed mode, turn the speed control knob (1) to the
„1“ position. The setting is suitable for processing soft fruits and vegetables (e.g. peaches, seed-
less watermelons, seedless grapes, raspberries, tomatoes and cucumbers).
• To switch on the appliance to continuous high speed mode, turn the speed control knob (1) to the
„2“ position. The setting is suitable for processing hand fruits and vegetables (e.g. apples, pears,
carrots, cauliflower and broccoli).
• To switch on the appliance in pulse mode, turn the speed control knob (1) to the „P“ position.
•
To switch off the appliance, turn the speed control knob (1) to the „0“ position.
Содержание 10027835
Страница 1: ...Entsafter 10027835 10027836 ...
