ONECELL25 - Installation Manual
23
8.3
Restoring Factory Settings
It might happen that:
•
Access passwords to the web interface are lost
•
New configuration parameters (such as firewall or unknown LAN IP) are such
that you cannot connect to the ONECELL25 web configurator
In that case, the restore factory settings will help you because, the following factory
settings are restored:
•
Software and web configurator loaded at manufacturing time
•
Factory configuration files
•
Factory default passwords
If the factory restore option is set (default OneAccess settings), one can now use
the factory restore procedure. It is triggered as follows:
•
Power-on the product
•
The ‘Status’ LED blinks very quickly, then it blinks more slowly.
•
When all LEDs of the front panel are lit, unplug the power cable.
•
Repeat the process three times and then let the router boot. The restore
operation will be done.
8.4
Configuration by Telnet / SSH / Console
The default telnet/console login / password is admin / admin. It is highly
recommended to change the default password from web interface to avoid intrusion
from hackers.
The ONECell25 has many powerful features that cannot be configured and
managed via the web Configurator.
Any user can use the console at own risks:
•
It may cause the web Configurator not to work properly
•
OneAccess only supports customers having with a maintenance contract with
OneAccess and being certified, trained users
8.5
Getting Support on ONECell25
Please use this link to get more documents and help:
http://www.oneaccess-net.com/en/cell
