ONECELL25 - Installation Manual
13
4
Interface Description
4.1
LAN 10/100 Mbps Interface (FASTETHERNET)
4.1.1 Characteristics
•
100Base-TX,
•
Full
duplex,
•
Auto-negotiation.
•
Auto
MDI/MDX
The Ethernet interfaces of the ONECell25 only support the 100 Mbps full-
duplex operations in auto-sense mode. If connected to devices in 10 mbps
or half-duplex, the ONECell25 interface will not be connected. The problem
can appear mostly with devices forced in such mode or with old Ethernet
hub.
4.1.2
Meaning of LED Colors
Lit green Led
Link active
Blinking yellow Led
Traffic in progress
4.1.3 Connector
Pinout
RJ45 Connector:
Pin
Signal
Pin
Signal
1 TD
(+)
5 NC
2
TD (-)
6
RD (-)
3 RD
(+)
7 NC
4 NC
8 NC
4.1.4 Cables
A standard Ethernet cable is needed (shielded UTP Cat. 5).
