ONE100 - Installation Manual
11
2.3
FCC Statement (USA)
The United States Federal Communications Commission (in 47 CFR 15.105) has
specified that the following notice be brought to the attention of users of this product:
This device has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
device generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If
this device does cause harmful interference to
radio or television reception, which can be determined by
turning the device off and
on, the user is encouraged to try to correct the interference's by
one or more of the
following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the device and the receiver.
•
Connect the device into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
The user may find the following booklet, prepared by
the Federal Communications
Commission, helpful: How to Identify and Resolve Radio/TV Interference Problems.
This booklet is available from the U.S. Government Printing Office, Washington,
D.C. 20402, Stock No. 004-000-00345-4.
Use of a shielded cable is required to comply within Class B limits of Part 15
of FCC
Rules.
Pursuant to Part 15.21 of the FCC Rules, any changes or modifications to this
device not expressly approved by OneAccess
may cause, harmful interference and
void the FCC authorization to operate this device.
