ONE100 - Installation Manual
24
4.2
Console port (CONSOLE)
4.2.1 Characteristics
•
RS
232,
•
9600
bps,
•
8 bits, 1 bit for stop, no parity.
4.2.2 Connector
Pinout
RJ45 Connector:
Pin
Signal
Pin
Signal
1 TX
5 NC
2 RX
6 Cable type
3 GND
7 CTS
4 NC
8 RTS
- TX: Transmission
- RX: Reception
- NC: Not connected
- GND: Ground
- CTS: Clear-To-Send
- RTS: Ready-To-Send
A console cable for router configuration and maintenance only requires TX, RX and
GND to be connected.
If the pin 6 is connected to the ground (pin 3), the cable is then identified as a cable
connected to an asynchronous terminal. In that case, CTS and RTS can be used.
4.2.3 Cables
The console cable is defined in Appendix A.
