background image

 

 

Introduction 

Thank you for choosing 

One61 Studio

 Smart Glove System (SGSytem). The SGSystem  is a remote control 

device for smart phones. With the SGSystem you can answer incoming calls and listen to music hands-
free. The SGSystem is compliant with the Bluetooth 4.1 and supports the following profiles: Hand Free 
Profile (HFP) and Human Interface devices (HID).  It is compatible with  the phone with the following OS, 
which covers most of the phone in the market: 

 

iOS 8.0 and above 

 

Androids  5.0 and above 

Features:  

 

Remote Voice Commands control for phone connection and your favorite music player 

 

Water resistant, may be use in inclement weather. 

 

more than 10 hours operation time 

What’s in the box? 

The smart glove system contains a pair of glove and a voice-activate remote control module, 
One61 VR module. This module is inserted in a dedicated packet in the gloves during normal 
use. 

 

                 

                       

                                              

 

    

              

 

Charging Battery 

You need to  charge the SGSystem module by connecting a micro USB power  to port (D) before 
the first time use. It takes about 2.5 hours to completely charge the SGSystem module.  
 
Note: the bluetooth connection between the phone and the SGSystem device will be reset 
during charging. 

The 161 VR Module will be placed

in the right hand sleeve

Содержание Smart Glove System






Отзывы: