One Stop Systems PE3RR Скачать руководство пользователя страница 74 | Manualshive

Страница: 74 / 75

background image

One Stop Systems

PE3RR PCI Expansion| 74

12 Appendix C Compliance

12.1 FCC

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his/her own expense.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the
equipment.

NOTE

The assembler of a personal computer system may be required to test the system and/or make necessary modifications if
a system is found to cause harmful interferences or to be noncompliant with the appropriate standards for its intended
use.

12.2 Industry Canada

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numériqué de la classe A est conformé à la norme NMB-003 du Canada.

12.3 CE

The product(s) described in this manual complies with all applicable European Union (CE) directives. OSS will not retest or recertify systems or
components that have been reconfigured by customers.

«
...
72
73
74
75
»

Содержание PE3RR












































































Отзывы:

Нет отзывов

Похожие инструкции для PE3RR

Бренд: PaloAlto Networks Страницы: 2

Бренд: T&D Страницы: 122

Бренд: NA Страницы: 22

Бренд: ZALMAN Страницы: 4

Бренд: Wintech Страницы: 21

IntroSpect Analyzer 2 Series

Бренд: Aruba Страницы: 5

Бренд: MICROENER Страницы: 24

Бренд: IEI Technology Страницы: 136

Бренд: Vista Страницы: 93

Бренд: Ciara Страницы: 14

BPN-SAS3-116A-N10

Бренд: Supermicro Страницы: 8

Бренд: Idis Страницы: 40

Бренд: IceManCooler Страницы: 2

Бренд: c Страницы: 32

ControlWave Remote Ethernet I/O

Бренд: Emerson Страницы: 3

Бренд: Emerson Страницы: 6

Bristol Helicoid Gauges

Бренд: Emerson Страницы: 1

ACC/ARTM-7221/SCSI

Бренд: Emerson Страницы: 62

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды