One Stop Systems PE3RR Скачать руководство пользователя страница 48

Страница: 48 / 75

One Stop Systems

PE3RR PCI Expansion| 48

7.3

Support for 3

Party PCI Cards

OSS will provide reasonable technical support to with 3

Party PCI cards. However, if you have verified a successful installation of the OSS PCI

Expansion System but having difficulty installing your 3

Party PCI cards, the PCI card manufacturer may be able to provide the best support.

IMPORTANT

The OSS PCI Expansion System is designed to function exactly like your desktop computer. This means that you should follow the PCI card

maker’s instructions for installation on a Windows or Mac computer as if the expansion chassis WAS the desktop computer. When correctly

installed, there is no difference to the operating system, removable cards, or most software.

7.4

Windows Error Codes

If you are having a problem with one of your devices, and the Device status box shows a Windows Error Code, refer to the following list of error
codes for guidance.

Error
code

Error description

Suggested resolution

Code 1:

This code means the system has not had a chance to configure

the device.

To resolve the problem, follow the instructions in the

Device Status box. In addition, it may be possible to

resolve this issue by removing the device in Device

Manager, and running the Add New Hardware wizard

from Control Panel.

Code 2:

Depending on which device is failing, two different messages

may display. This code means that the device loader

(DevLoader) did not load a device. When this device is a Root

Bus DevLoader (for example, ISAPNP, PCI, or BIOS), the

following message is displayed: "Windows could not load the

driver for this device because the computer is reporting two

<type> bus types. (Code 2) "

Contact the computer manufacturer to get an updated

BIOS for the computer, where <type> is ISAPNP, PCI,

BIOS, EISA, or ACPI.

Code 2:

When the device is not a root bus DevLoader, the following

message is displayed: "The <type> device loader(s) for this

device could not load the device driver. (Code 2) "

To fix this, click Update Driver. To update the device

driver where <type> is the DevLoader such as FLOP, ESDI,

SCSI, and so on.

Содержание PE3RR












































































Результаты поиска

Содержание PE3RR

Отзывы:

Похожие инструкции для PE3RR

Бренды по названию

Популярные бренды

One Stop Systems PE3RR, Руководство пользователя

Результаты поиска

Содержание PE3RR

Отзывы:

Похожие инструкции для PE3RR

Бренды по названию

Популярные бренды