One Stop Systems PE3RR Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 75

background image

One Stop Systems

PE3RR PCI Expansion| 22

The OSS host card and expansion board are not visible or will not show up in Windows Device Manager until the expansion system is connected
correctly and properly powered ON. Always power up the PE3RR expansion chassis first then the host computer. A OSS PCIe Host interface
card if not attached to a OSS expansion unit (that is powered ON) will not be detected or recognized by the host computer Operating System.

Avoid connecting an energized or powered UP OSS expansion chassis to a Host Interface card that is installed in a powered UP computer as this
can cause error on the Operating System (or it will lock up the system).

3.1.1 Front LED

There are two front LED indicators, greed and red.



Green LED: this is a power indicator LED. When the unit is powered up the front green LED indicator will lit up.



Red LED: this is a storage / hard disk drive LED. The red LED is not being utilized with this product PE3RR model. This red LED is for
an old SCSI and IDE hard disk drives, the red LED comes on when a hard disk drive is attached.

3.1.2 Power Supply LED indicator

Two power supply LED indicators on the back should be ON as solid green. It indicates that the unit is powered UP correctly. Each power
supply module has its own power LED indicator.



Green LED: Unit is ON



Amber / Orange LED : standby mode, waiting to be powered UP

«
...
20
21
22
23
24
...
»

Содержание PE3RR












































































Отзывы:

Нет отзывов

Похожие инструкции для PE3RR

Бренд: Aastra Страницы: 2

Бренд: Rane Страницы: 4

eBOX532-100-FL Series

Бренд: AXIOMTEK Страницы: 2

Бренд: Garland Страницы: 43

EZ-Extender Analog 120-Pin Probing Board

Бренд: Analog Devices Страницы: 29

Seven Solutions WR-ZEN Series

Бренд: Orolia Страницы: 167

Бренд: addlink Страницы: 9

1394 Dual-Port CardBus

Бренд: SIIG Страницы: 8

dspstak 21262sx

Бренд: Danville Signal Processing Страницы: 35

Бренд: Quantum Страницы: 7

AT32F421 Series

Бренд: ARTERY Страницы: 337

EK-FC980 GTX Classy

Бренд: ekwb Страницы: 2

Бренд: Digi Страницы: 75

Ultra WiFi Booster

Бренд: Optus Страницы: 8

FiberTwist XGS2420

Бренд: Genexis Страницы: 7

EK-Quantum Vector TUF RX 6800

Бренд: ekwb Страницы: 14

STM32MP157 Series

Бренд: ST Страницы: 47

mPCIE-ADIO16-8F Series

Бренд: Acces I/O products Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды